Mounted Units

PEER Bearing offers an extensive range of standard catalog and special design bearings and bearing-housing assemblies. All popular designs are represented in our full line offering;

• Eccentric Locking collar in flush and wide inner ring varieties
• Dual set screw in flush and wide inner ring varieties
• 360° Concentric locking Patented Grip-It PLUS.
• Adapter lock; 1:12 taper bore, sleeve and locking nut.
• Concentric Locking collar

• Pillow-Blocks in high grade cast iron, high strength ductile iron, stamped steel, polymer and stainless steel.
• 2, 3 and 4 bolt flanges in high grade cast iron, high strength ductile iron, stamped steel, polymer and stainless steel.
• Hanger units, take-up units, cartridge and other specialty use designs.
• Rubber insulators.

• 6-Finger grip design maintains shaft to bore concentricity
• Significantly reduces vibration and eccentric shaft rotation
• Easily assembled and disassembled
• Will not scratch or mar the shaft
• Grip-It PLUS keeps the collar attached to the bearing for ease of use and assembly.
• Available in both standard and medium duty versions
• Available in all popular housing styles; Cast iron, ductile, iron, stamped steel, rubber insulating, etc.

• Air Handling Bearings eliminates shaft offset through the entire length of the bearing bore
• Significantly reduces vibration and noise
• Rotational balance remains constant
• Easily assembled and disassembled
• Will not scratch or mar the shaft
• Reduced fretting corrosion
• Available in both standard and medium duty versions
• Available in all popular housing styles; Cast iron, ductile, iron, stamped steel, rubber insulating, etc.

Bearings and housings are individually matched to achieve an air handling fit, a unique set of tolerances to ensure easy alignment and prevent bearing pre-load when mounting on light steel and aluminum frames.

• 100% noise tested on state-of-the-art Anderon Meter equipment to EMQ (electric motor quality) standards.
• Bearings and housings are individually matched to achieve an air handling fit, a unique set of tolerances to ensure easy alignment and prevent bearing pre-load when mounting on light steel and aluminum frames.
• Solid foot housing design is standard on all pillow blocks, 2-bolts and heavy duty 4-bolt flanges to offer greater mounting stability.
• Each bearing is manufactured with SAE52100 bearing steel with grade 10 or better balls. Our 62 degree set screw angle is proven to provide greater locking power between the bearing and shaft.
• Each unit is then certified and labeled for air handling use.

PEER "AP" line of Mounted Unit bearings and assemblies are designed for use in extreme contamination applications. Perfectly suited for agricultural applications and high contamination environments with advanced seals and lubricant.

• High performance seals for both flush and extended inner ring bearings.
• Increased lubricant fill for added contamination protection and long life.
• Available in all bearing styles, types and in a wide variety of housings.
• Low to high speed positive protection allows for use across most demanding platforms.

Protective/safety caps for all types of housings used in conveyor applications in the material handling industry. Can be used on most cast iron housings to prevent contact with moving parts; bearing, shaft, etc.

• High strength Polypropylene material
• High visibility yellow color
• For use with all bearing styles and locking mechanisms.
• Securely fastens to housing.

Even under the harshest conditions - sulfuric, nitric or acetic acids and in contaminated or uncontaminated water conditions - PEER's all stainless steel units provide excellent corrosion resistance.

• Stainless steel housings are designed with solid bases/backs and smooth surfaces to allow for complete and easy wash-down.
• Stainless steel bearings are designed with extended inner rings for shaft stability and set screw locking for bi-directional applications.*
• Standard closures include a stainless steel slinger over a full contact silicon seal to form a double barrier of protection during operation and wash-down.
• Stainless steel bearings are filled with FDA/USDA (approved for incidental food contact) water/wash resistant, odorless, tasteless Mobilgrease FM102.
• Stainless steel units are available from stock:* - Pillow blocks (P)
  - Tapped-base pillow blocks (PAS)
  - Two-bolt flange (FT)
  - Three-bolt-flange (FB)
  - Four-bolt flange (F)
  
• Stainless steel bearings are available in common inch and metric shaft sizes ranging from 1/2" to 11/2" and 20mm to 40mm
• Assemblies are also available with electroless nickel plated housings.

Bearings designed specifically for use in high temperature environments.

• S2 stabilized rings capable of use up to 480°F (250°C)
• High temperature lubricants
• Viton seals
• Stainless steel shrouds and slingers.
• Increased RIC to compensate for thermal expansion.